Knitted wire meshes

Knitted wire meshes are marketed like a flattened continuous sleeve whose structure is based on a series of beautiful and decorative linking arches interwoven by the folds of the wire.

These meshes, thanks to their great ductility, allow for making bodies of quite different geometry and density that grant them noticeable physical and technical qualities making them suitable to meet a wide range of industrial applications.

We manufacture a wide variety and range of knitted wire meshes a long time since.

Our great experience in the drawing technology, as one of the first companies in the manufacture of Woven Wire Cloth, places us in the best position to fully meet the most demanding technical conditions as to quality and variety of materials.

Also, our great production capacity allows us to have a large raw materials stock to be able to deliver any order at very competitive prices.

Our workshop, equipped with skilled staff and the relevant technology, manufactures components for different application under particular specifications, made of woven wire cloth or knitted wire meshes.

We are in a position to meet manufactures going from a single unit up to large series, even units weighing a few grammes up to dimensions typical of the petrochemical industry.

Technical data

A	B	C	D	F	G
60	60	55	36	2X4	54,24
120	15	100	34	4,5X4 / 2,5X4	64,54
140	150	120	40	4,5X5,5 / 2,5X5,5	65
200	205	180	56	4X3,5 / 2,5X3,5	105,4
250	260	240	65	4X4 / 3X4	123,22
410	420	380	94	5,2X3,5 / 3X3,5	198
560	565	490	102	7,5X5 / 2X5	195,16
560	560	470	128	5X4 / 2,5X4	270

The table shows a wide range of knitted wire meshes whose characteristics meet the most frequent use applications.

• A: It is the standard width of the mesh going out of the machine, once flattened (flattened pipe).
• B: lt is the maximum width the machine can deliver.
• C: It is the minimum width the machine can deliver.
• D: Number of machine needles .
• F: Mesh opening. Also included in the nominal width. Two mesh openings machines:
  • The first: opening is that between two needles.
  • The Second: is that of the hole of the needle itself, i.e., there is one opening of each alternatively.
• G: Weight of 1 linear m of flat mesh, in grammes, 0,26 mm ø wire, AISI 304, mesh at rest not drawn.
  If the wire diameter is different the weight of the mesh is proportional to the wire section(*).
  Make the conversion according to the specific weight of each material for the different qualities.

(*) Section, in the sense of the area (pr² ).